Name: Bending beam load cell GS-1A
Brand: Gicam

Bending beam load cells for weighing platforms, hoppers, tanks, etc. of low and medium capacity

Bending beam load cell

OIML C3 homologated from 75 kg to 300 kg

Upon request with ATEX certification

Click to enlarge image

Material	Stainless steel
Nominal load	10, 15, 20, 25, 30, 50, 75, 100, 150, 250, 300, 500, 750 kg
Limit load	150 % F.S.
Breaking load	300 % F.S.
Supply voltage	Vcc 15 Max
Output	2 mV/V
Output tollerance	0,1 % F.S.
Zero tollerance	1 % F.S.
Linearity	0,03 % F.S.
Hysteresis	0,03 % F.S.
Reapeatability	0,03 % F.S.
Input resistance	380-386 ohm
Output resistance	350-353 ohm
Insulation resistance	>= 2000 MOhm
Creep (30 Minutes)	0,03 % F.S.
Thermal compensation	-10 / +40°C (14 / +104°F)
Operating temperature	-20 / +70°C (-4° / +158°F)
Temperature deviation zero	0,003 % F.S. / °C
Temperature deviation full scale	0,002 % F.S. / °C
Protection class	IP 67
Standard cable length	5 m – 6 x 0,30 (shield not connected to the load cell body)

General precautions to be followed in the installation and assembly of load cells:

Follow the direction of application of force on the load cell
Do not exceed the limits of the temperature as indicated in the data sheet
Do not remove labels from the load cell
Adequately protect the cables with sleeves or channels
Carry out on each load cell a ground connection with suitable cable, shunt on mounting accessories
Do not carry out any welding on the mechanical structure after mounting the load cell
Avoid or reduce to a minimum level any mechanical constraints between the rigid structure and the weighing structure to avoid error in weighing and return to zero
In case of vibration or dynamic loads product the load cells with puffers / shock absorbers
Protect load cell from any dust accumulation with any appropriate means

Type	SHIELDED CABLE 6C R6 PVC 6X0,30
Length	5 m (body lead cell not connected shield)
Red	+ IN
Black	- IN
Yellow	+ REF
Blue	- REF
Green	+ OUT
White	- OUT

Bending beam load cell GS-1A