GICAM sells various types of signal converter. We have signal converters that transmit serial protocols by radio frequencies, very simple to program and control. Our converters are suitable for use in industry. We offer signal converters that transform analog input signals into standardized analog signals, and signal converters that can be connected to devices that have RS-485 or RS-422 protocols.
CONVERTER 0 - 10 V
Click to enlarge image
| Board power supply | 24 V dc ± 15 % | |
| Cell power supply | 4 V dc per cell (1 cell of 350 Ω or 700 Ω) protected against short circuit | |
| Power assumption | 0,6 W | |
| Output | 0 to +10V (-1/+11V) with load ≥ 2 kW | |
| Input sensitivity | 1 – 2 mV / V depending on resistance R3 (15 ppm): 1mV7V with R3 = 200 Ω, 2 mV / V without R3 | |
| Dimensions | 35 x 22 x 8 mm | |
| Connections | Wires to be welded | |
| Cell connection | With 4 wires | |
| Storage temperature | - 10 °C / + 50 °C (14 °F / 122 °F) | |
| Operating temperature | - 20 °C / + 60 °C (- 4 °F / 140 °F) | |
| Linearity | 0.02% | |
| Thermal stability | 30 ppm/°C | |
| Zero adjustment | ± 10 % of full scale through multi-turn trimmer | |
| Gain adjustment | ± 10 % of full scale through multi-turn trimmer | |
| Analog Filter | 100 Hz | |
| Type | SG01 Connection |
| Length | ND |
| 1 | + Power supply 24 V dc |
| 2 | - Power supply |
| 3 | + Output 0-10V (negative = - power supply) |
| 4 | + Power supply Cell |
| 5 | + Signal Cell |
| 6 | - Signal Cell |
| 7 | - Power supply Cell |
General precautions to be followed in the installation and assembly of load cells:
